Car headlights adhesive sealant quality adhesive sealant adhesive sealant wholesale sales Product Description: This product can be combined with moisture in the air at room temperature to cause crosslinking, curing become high-performance elastomer is an excellent metal and non-metallic materials, adhesives and fixed plastic; for fast bonding, curing materials no obvious shrinkage and temperature; compound non-toxic, non-corrosive; good elasticity and toughness Colloid completely cured after fatigue, may full silicone material excellent electrical characteristics in the range of -60 ~ 200 ° C to maintain elasticity. The series is a one-component, semi-flowing, alcohol type RTV silicone rubber, the curing process to release alcohols, copper and polycarbonate (PC) and other non-corrosive material, in full compliance with the EU RoHS directive. Features: ◆ table dry fast, fast curing ◆ aluminum, copper, stainless steel and other metal adhesion ◆ good elasticity toughness, and resistance to yellowing ◆ excellent electrical properties, fight through excellent performance ◆ moisture, shock resistance, corona, anti-leakage Typical Applications: ◆ high-end fixtures adhesive seal ◆ ◆ The car lampshade adhesive sealing electronic components quickly locate and appliances panel bonding adhesive seal ◆ technical parameters: No. Test items Results 1 Appearance translucent semi-flow 2 Density (g / cm3) 1.00-1.10 3 dry time (min, 25 ℃) 3-10 4 Temperature (℃) -60 ~ 200 5 hardness (Shore A) 20-30 6 Tensile strength (MPa) ≥ 2.0 7 Elongation (%) ≥300 8 dielectric constant (1.2MHZ) 2.6-2.8 9 dielectric strength (KV / mm) ≥20 10 Volume resistivity (Ω · cm) 1.0 × 1014 (NOTE: Dry time (ASTM American Standard) means: at 25 ℃, 80% relative humidity, specific time sizing, the glass rod with a smooth round light contact surface sizing, surface sizing glass rod round left when no leaving adhesive residue, called the surface dry.)