Full-color LED display potting factory direct Product Description: The product consists of two parts A, B liquid components. When the two components to a certain weight or volume mixing ratio, the experience of curing the mixture at room temperature for a flexible elastomer. No obvious material curing shrinkage and temperature rise. Rubber non-toxic, non-corrosive; UV resistant material is completely cured after anti-aging properties, good repair, with excellent weather resistance, to maintain elasticity in the range of -40 ~ 200 ℃, excellent insulation properties. The series is a two-component condensation-type silicone, can be cured at room temperature, ethanol molecules released during the curing of the PC, PP, ABS, PVC, copper and other materials will not cause corrosion; for most of the electronic parts and materials (PP, except PE) good adhesion. Features: ◆ excellent adhesion, moisture-proof waterproof outdoor excellent results for the bonding material non-corrosive ◆ ◆ colloid flexible, has good resistance to shock and vibration deformation ◆ High insulation, potting after product work stable ◆ good fluidity , can quickly self-leveling, high production efficiency ◆ potting compound nontoxic, dismountability; UV resistant material fully cured after anti-aging properties, good repair ◆ excellent weather resistance, long-term use can be typical outdoor Applications: ◆ Universal, for high-end LED display potting ◆ Wall Washer proof potting technical parameters: No test items Result 1 Appearance (after curing) black (glossy) 2 used in a proportion (A︰B) 10: 13 Viscosity (mPa · s, mixed) 2000 ± 300 4 Density (g / cm3) 0.90-1.05 5 dry time (min, 25 ℃) 15-30 6 hardness (Shore A) 10 ± 5 7 Tear strength (MPa) 0.3 8 Tensile strength (MPa) 0.3 9 Elongation (%) ≥120 10 Dielectric strength (kV / mm)> 18 11 Volume resistivity (Ω · cm) 1.0 × 1014 (NOTE: Dry time (ASTM American Standard) refers to the 25 ℃, 80% relative humidity, specific time sizing, the glass rod with a smooth round light contact with the surface sizing, and did not leave when the ball left the glue surface of the glass rod Under residue, called the surface dry.)