Wall Washer moisture potting prices high wall washer wall washer Hot potting potting Wholesale Product Description: The product consists of two parts A, B liquid components. When the two components to a certain weight or volume mixing ratio, the experience of curing the mixture at room temperature for a flexible elastomer; no obvious material curing shrinkage and temperature; compound non-toxic, non-corrosive; fully cured after material resistant to ultraviolet radiation, anti-aging properties, has excellent weather resistance, to maintain elasticity in the range of -40 ~ 200 ℃, excellent insulation properties. The series is a two-component condensation-type silicone, can be cured at room temperature, ethanol molecules released during the curing of the PC, PP, ABS, PVC, copper and other materials will not cause corrosion; for most of the electronic parts and materials (PP, except PE) good adhesion. Features: ◆ excellent adhesion, moisture-proof waterproof outdoor excellent results for the bonding material non-corrosive ◆ ◆ colloid flexible, has good resistance to shock and vibration deformation ◆ High insulation, potting after product work stable ◆ good fluidity , can quickly self-leveling, high production efficiency potting ◆ has dismountability, sealed components can be removed for repair and replacement ◆ toxic compound; UV resistant material fully cured after anti-aging performance ◆ excellent weather nature, outdoors can be long-term use Typical applications: ◆ for LED outdoor display module potting potting ◆ Wall Washer moisture technical parameters: No test items Result 1 Appearance (after curing) black (glossy) 2 used in a proportion ( A︰B) 10︰1 3 Viscosity (mPa · s, mixed) 1500 ± 300 4 Density (g / cm3) 0.95 ± 0.05 5 dry time (min, 25 ℃) 10-20 6 hardness (Shore A) 2 -57 tear strength (MPa) 0.2 8 Tensile strength (MPa) 0.2 9 Elongation (%) ≥120 10 Dielectric Strength (KV / mm)> 18 11 Volume resistivity (Ω · cm) 1.0 × 1014 (Note: Dry time (ASTM American Standard) refers to the 25 ℃, 80% relative humidity, specific time sizing, the glass rod with a smooth round light contact surface sizing, glass round left When the plane did not leave glue residue, called the surface dry.)